How do you curve a floor hockey stick? - floor hockey sticks
As a flat curve for hockey sticks. I then put in boiling water? and do I have to keep around the curve until it cools down?
Sunday, January 17, 2010
Floor Hockey Sticks How Do You Curve A Floor Hockey Stick?
Subscribe to:
Post Comments (Atom)
9 comments:
When you say, a gym class, you can not really do.
I assume you made your own floor. You have two options:
Boiling water. Time depends on the material of the plate. I want the curve) (with a glove or a towel in his hand, then paste them into cold water. This cools quickly, so you do not keep it all the time
Hairdryer: same idea, if hot enough, turn and in cold water.
Wait Flame: Again, rotate until it is warm enough, and in cold water.
Any way, the road is finally beginning to lose its curvature, and if this happens, do it again.
I do, it's heat with a hair dryer for a few minutes, they turn to my taste, and immediately put them in a sink full of ice water to remain. If you cool it slowly in time are bent out of shape in order to be observed immediately in cold water.
I do, it's heat with a hair dryer for a few minutes, they turn to my taste, and immediately put them in a sink full of ice water to remain. If you cool it slowly in time are bent out of shape in order to be observed immediately in cold water.
If it is really difficult to fold then yes, boiling water does the trick. As fragile as those clubs in the closet of the sport in high school are only doubled in the hand, or step onto the page and press the curve with the axis.
Well, I only by the fire and stand on it until it bends. Did it all the time in the gym, because in every1 and left righy
Use a piece of your oven. Put on the sheet until hot. Turn on the desired curve, then leave to cool.
Use a piece of your oven. Put on the sheet until hot. Turn on the desired curve, then leave to cool.
run until it looks like, then you can adjust if necessary
Give is to bend the end, and slowly until they bent
Post a Comment